Silicone Molds

Silicone mold, resin mold for crafts. Our silicone mold is super shiny and is made with high quality durable silicon. Is super easy to use! You don't need a releasing agent to take off from the mold. This mold works great with 2 part AB epoxy resin.

Quantity: 1 mold, used for resin craft. Any additional items in photographs are for examples or props and not included with the mold. 

Due to differences in screens/monitors, colors may not match the photos exactly. Pictures are enlarged to show detail. Please reach out if have any question on sizing. I am happy to help

Super-FAST shipping. Most orders ships within 24 hours.

These Molds are sold for novelty purposes only.

Stuck Casts - If an epoxy resin cast seems stuck and won’t de-mold don’t panic and start tearing up the mold! First check that the cure time and temperature for the material you used are correct as this can cause the cure time to be shorter or longer depending on these conditions. This is usually a common issue and waiting longer for the cure and increasing the temperature does the trick. If the cast is still being stubborn throw the mold in the freezer for 30-60 minutes. This will not hurt the silicone and should make the cast pop right out.

Molds are Perishable - Silicone Molds are perishable items that can be compared to paint brushes. They are used to create art pieces and over time need to be replaced. The better you take care of your Silicone Molds the longer they will last however overtime they will "dull" which means lose the sharp edges on the details of the mold. This is completely normal and with proper care can be slowed significantly, but not stopped.

Read the Instructions for Your Epoxy Resin Product - This is an extremely critical step, even if you are used to a product it’s always a good idea to REREAD the label and refresh your knowledge as occasionally companies change and update their instructions. More importantly read and follow all safety warnings as these products are very strong chemicals that can potentially harm you if improperly used. If you cannot find the instructions or are not sure go to the epoxy resin brand's website as they will have them posted there.

Layers - When casting with Epoxy Resin, depending on the product you do not want to pour more than 1/4" to 1/2" at a time depending on the products specifications. Some products are designed for Deep Pours and are clearly stated as such. If you pour too thick you risk boiling out your cast due to the exothermic reaction that occurs when the Epoxy Resin cures and will ruin your cast and most likely the mold. In addition pouring in layers reduces the occurrence of bubbles in your cast.

Thank you for coming to our shop, if you have any questions, please contact us first, we will reply you ASAP, thank you